Cable Industries is experienced in designing and fabricating high quality assemblies needed for industrial applications, architectural railings and other uses.
Industrial Assemblies
We fabricate assemblies using Webbing, Fiber Rope and Wire Rope, galvanized and stainless steel, uncoated and coated, clear or colored with an unlimited combination of sizes, lengths and end fittings. Contact Cable Industries for lanyards, door cables, taglines, wire railings, marine applications, winch lines, hoist cables, and special wire rope fabrications. No requirement is too big or too small.
Cable Railing Systems
Cable Railings are fabricated using Turnbuckles, End Fittings and Wire Rope. For architectural railing purposes, the wire needs to be tensioned mechanically. Generally, a conventional turnbuckle can tension the cable up to 50’ in a straight run and meet code. The End Fitting is what attaches your assembly to your post.
For all major components we use Type 316 stainless steel. Type 316 is low-carbon “18-8” chromium-nickel stainless steel modified by the addition of molybdenum, which greatly increases its corrosion resistance.
Sailboat Rigging Lines
We replace your Sailboat Rigging Lines (Life Lines or Standing Rigging) in one of two ways. Either mail us your rigging lines so that we do the measuring for you or fill out our online form.
Instructions if mailing us your rigging lines:
Make sure to remove the rigging you want to replace and set all of the turnbuckles to their medium air setting. Print out our Rigging Labels and attach one to each piece. If there are any modifications you would like done to the piece, please specify it on the label. Ship them to:
WiscoLift, Inc.
ATTN: Cable Industries Div.
W6396 Specialty Drive
Greenville, WI 54942
844-947-3767 (844-WIRE-ROPE)
Make sure to ship your package by a trackable and insured method as we cannot be held responsible for items that do not arrive at our facility.
Garage Door Cables
We fabricate high quality assemblies for garage doors in quantities of 25 pairs. They are constructed using 7 x 7 and 7 x 19 cable in diameters of 3/32″,1/8″, 5/32″, and 1/8″. Plain loop and loop with thimbles are available for one end. All other ends have a stop.
For custom cable assemblies, please contact our Sales Representative at 844-947-3767 or email us at CustomCable@CableInd.com and we will respond as soon as possible.